Actron CP9180 - Keypad Test

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 9
Using The Scan Tool
3
4.When Done, Press BACK Key.
Keypad Test
The Keypad Test is used to verify keys are working correctly.
From System Setup menu:
1.Select Keypad Test.
•Use
UP or DOWN arrow
key until Keypad Test is
highlighted.
•Press
ENTER .
Check for missing
spots in display
Display Test
Press Back to Quit
SYSTEM SETUP
=====================
Contrast Adjust
Display Test
Keypad Test
Memory Test
Tool Information
Program Mode
