• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 11
Using The Scan Tool
3
✓ The tool reports its progress on
the bottom of the display.
❒ Memory Test may take
several minutes to complete.
❒ Memory Test results display.
❒ If no problems were
detected, then PASS is dis-
played
❒ If RAM fails, an error
message is shown.
❒ If ROM fails, a checksum is shown.
2.Return to System Setup menu.
•Press
ENTER
.
Program Mode
The Program Mode is used for
updating the Scan Tool. Instructions
are provided with upgrades.
Tool Information
=====================
S/N: 1234567
SWID: A7B1
Press BACK to Exit
SYSTEM SETUP
=====================
Contrast Adjust
Display Test
Keypad Test
Memory Test
Tool Information
Program Mode
To Next Page
Loading...
