Actron CP9180 - View Tool Information

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 7
Using The Scan Tool
3
3.Save Contrast Setting.
•Press
ENTER .
✓ Press ENTER again to return to
theSystem Setup menu.
View Tool Information
✓ This function allows you to view specific tool information that may
be needed when contacting customer service.
From System Setup menu:
1.Select Tool Information.
•Use
UP or DOWN arrow
key until Tool Information is
highlighted.
•Press
ENTER .
2.View Information:
❒ S/N (Serial No:)
❒ Software ID (SW ID:)
3.Write Down Scan Tool
Information.
• Space is provided on inside
front cover to record the Scan
Tool information.

SYSTEM SETUP
=====================
Contrast Adjust
Display Test
Keypad Test
Memory Test
Tool Information
Program Mode
Tool Information
=====================
S/N: 1234567
SWID: A7B1
Press BACK to Exit