Using The Scan Tool
3 – 8 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
4.Return to Setup Tool Menu.
•Use the
BACK
key.
OR
•Use the
ENTER
Key.
Display Test
The Display Test is used to check the display.
✓ The test fills every pixel of the display with a solid black character.
From System Setup menu:
1.Select Display Test.
•Use
UP
or
DOWN
arrow
key until Display Test is
highlighted.
2.Start Display Test.
•Press
ENTER
.
3.Look for Missing Spots.
• All characters display in solid black if
there are no concerns.
• Screen flips back and forth between
screens shown below.
SYSTEM SETUP
=====================
Contrast Adjust
Display Test
Keypad Test
Memory Test
Tool Information
Program Mode
To Next Page
Loading...
