Actron CP9180 - View Freeze Data

Vehicle Diagnostics
4 – 18 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4
4
Customize Lines
✓ The Customize Lines allows the number of lines to be shown at one
time to be set from 1 to 8.
✓ Selecting fewer lines provides faster update speeds. The default is a
eight-line display.
From Select Data to View menu:
1. Select Customize Lines.
•Use UP or DOWN arrow
key until Customize Lines is
highlighted.
•Press
ENTER .
2. Select Display Lines.
•Use
UP or DOWN arrow
key.
•Press
ENTER .
View Freeze Data
When an emission-related fault occurs, certain vehicle conditions are
recorded by the on-board computer. This information is referred to as
freeze frame data. View Freeze Data is a snapshot of the operating
conditions at the time of an emission-related fault.
✓ View Freeze Data can be overwritten by faults with a higher priority.
✓ If codes were erased, View Freeze Data may not be stored in vehicle
memory depending on vehicle.

Select Data to View
=====================
Entire Data List
Custom Data List
Customize Lines
Select Display Lines
=====================
1
2
3
4
5
6