Actron CP9180 - Vehicle Info

Vehicle Diagnostics
4 – 32 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4
4
4. After recording, Scan Tool
displays a prompt to
Playback Data.
• Answer No to return to
OBD II Function List.
•Answer Yes to display
recorded data.
❒Refer to Playback from
Review Data and press
ENTER .
Vehicle Info
The Vehicle Info function allows the Scan Tool to request the vehicle’s
VIN number, calibration ID(s) which identifies software version in
vehicle control module(s), and calibration verification numbers
(CVN(s).)
✓ Vehicle Info function applies to model year 2000 and newer OBD II
compliant vehicles.
✓ The Scan Tool cannot verify if data is correct for scanned vehicles.
✓ CVNs are calculated values required by OBD II regulations.
✓ The CVN calculation may take several minutes.
✓ CVNs are reported to determine if emission-related calibrations have
been changed. Multiple CVNs may be reported for a control module.
Playback Data?
<Yes> <No>
Record Data