Actron CP9180 - Page 68

Vehicle Diagnostics
4 – 22 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4
4
3.Depending on the Drive Cycle Monitors one of these 2 screens
will be present.
✓ The Scan Tool display is
continuously updated. Only the “inc”
monitors are displayed. Monitors
designated “n/a” or “ok” are not
displayed.
✓ When all Monitors are “OK” the
following Screen is shown.
4.Return to Previous Menu.
Press
BACK key.
This Drive Cycle
=====================
Catalyst Mon inc
Htd Catalyst inc
Evap System Mon inc
Since DTCs Cleared
=====================
Catalyst Mon inc
Htd Catalyst inc
Evap System Mon inc
OR
OR
This Drive Cycle
=====================
All Monitors OK
Since DTCs Cleared
=====================
All Monitors OK