Ferroresonant L-828/L-829 CCR Safety
2009 ADB Airfield Solutions, Incorporated
96A0288T 1-3
All rights reserved Issued 9/04
WARNING: Use of this equipment in ways other than
described in this manual may result in personal injury, death, or
property and equipment damage. Use this equipment only as
described in this manual.
ADB Airfield Solutions cannot be responsible for injuries or damages
resulting from nonstandard, unintended applications of its equipment. This
equipment is designed and intended only for the purpose described in this
manual. Uses not described in this manual are considered unintended uses
and may result in serious personal injury, death, or property damage.
Unintended uses may result from taking the following actions:
• Making changes to equipment that have not been recommended or
described in this manual or using parts that are not genuine ADB
Airfield Solutions replacement parts
• Failing to make sure that auxiliary equipment complies with approval
agency requirements, local codes, and all applicable safety standards
• Using materials or auxiliary equipment that are inappropriate or
incompatible with your ADB Airfield Solutions equipment
• Allowing unqualified personnel to perform any task
Read the installation section of all system component manuals before
installing your equipment. A thorough understanding of system
components and their requirements will help you install the system safely
and efficiently.
WARNING: Failure to follow these safety procedures can
result in personal injury or death.
• Allow only qualified personnel to install ADB Airfield Solutions and
auxiliary equipment. Use only approved equipment. Using
unapproved equipment in an approved system may void agency
approvals.
• Make sure all equipment is rated and approved for the environment in
which you are using it.
• Follow all instructions for installing components and accessories.
• Install all electrical connections to local code.
(contd.)
To Next Page
Loading...
Need help?
General