ADB Signature Series - Section 8 Wiring Schematics; 2. Wiring Schematics

8-1Ferroresonant L-828/L-829 CCR Wiring Schematics
 2009 ADB Airfield Solutions, Incorporated
96A0288T 8-1
All rights reserved Issued 9/04
Section 8
Wiring Schematics
This section provides wiring schematics for the ADB ferroresonant L-
828/L-829 constant current regulators (CCRs) (4-70 kW/6.6 A/20 A) with
universal regulator controller (URC) cards.
See Figure 8-1 thru 8-5 for the L-828/L-829 CCR internal wiring schematic.
If you have core 35A0592 thru 35A0596 (core number is found on label on
top of core) use Schematics 8-4 and 8-5. All other cores use Figures 8-1
thru 8-3.
NOTE: For the ACE to URC PCB internal wiring diagram for
Ferroresonant CCRs (3 and 5 Step), refer to the Wiring Schematics section
in
Advanced Control Equipment (ACE) manual 96A0287 or
Advanced Control Equipment (ACE2) manual 96A0357.
NOTE: For Powerpack internal wiring diagram for Ferroresonant CCRs (3
and 5 Step), refer to the Wiring Schematics drawing 43A2616 Sheet 1 & 2.
1. Introduction
2. Wiring Schematics