Ferroresonant L-828/L-829 CCR Record of Changes
2009 ADB Airfield Solutions, Incorporated
96A0288T
All rights reserved Issued 9/04
6-2, 7-5,
7-6, 7-9,
8-2 thru 8-
5
Added subsection Input Power Breaker Sizing
and added note on circuit breaker rating in
reference to Table 2-5. Changed Table 2-5.
Added contactors (53A0412-40 and 53A0412-
90) to parts list and to Figure 7-2 (Part 1 of 2).
Deleted part 72A0096 from Figure 7-2. Added
new wiring schematics in Figure 8-2 for
SMR/SMI options. Updated wiring schematics
in Figure 8-1. Added warning about putting
conduit wiring on right side of CCR. Added
Table 2-5 on input current. Removed SMI and
SMR from L-828/L-829 CCR Optional Parts.
7-8
Added troubleshooting problem and new
wiring procedure in Section 6, Added part
number 44A6178 to Figure 7-3.
7-9, 8-1
thru 8-4
Added stacking kit 94A0355 to Table 2-4
(Optional Equipment) and to L-828/L-829
Optional Parts. Updated Fig. 8-1 wiring
schematic. Deleted Figure 8-2 because Figures
8-1 and 8-2 were combined. Updated ordering
thru 2-10,
2-13, 3-4
thru 3-7
Added procedure for stacking CCRs using
stacking kit 94A0355. Deleted references to
2400 Vac CCRs. Updated Tables 2-3,
2-5, and 2-12. Deleted Table 2-6. Updated
3-8, 4-3,
4-4, 7-3,
Added information on SGRS style Powerpack
CCRs
2,4-4,7-
Corrected AWG sizes in Table 2-2, 2-3.
Warning Note on with Figure 3-1, reworded
Step 3Output Current Adjustments
Added 50/ 70KW and Powerpacks
Corrected Title Page of Manual
Added detailed info about 50/70Kw
Added Digital Power Meter
Added I/O Table 3-4