112 MotionCreatorPro
Z In “Linear Mode,” it causes the axis to move to Distance.
The related function is _8102_start_tr_move_xy,
_8102_start_sr_move_xy.
Z In “Circular Mode,” it causes the axis to move to Dis-
tance(By Pos/Dist(pulse)).The related function is
_8102_start_tr_arc_xy, _8102_start_sr_arc_xy.
Stop Button: Clicking this button will cause the 8102 to deceler-
ate and stop. The deceleration time is defined in “Decel. Time.”
The related function is _8102_sd_stop().
17.Buttons:
Z Next Card: Change operating card.
Z Save Config: Save current configuration to 8102.ini And
8102MC.ini.
Z Close: Close the menu.
To Next Page
Loading...
