ADLINK Technology PCI-8102 - Page 165

Function Library 155
on_off: ON-OFF state of SVON signal
pcs_logic: PCS signal input logic
clr_mode: Clear action mode.
X clr_mode = 0 , Clear on the falling edge (default)
X clr_mode = 1 , Clear on the rising edge
X clr_mode = 2 , Clear on a LOW level
X clr_mode = 3 , Clear on a HIGH level
inp_enable: INP function enabled/disabled
X inp_enable = 0, Disabled (default)
X inp_enable = 1, Enabled
inp_logic: Set the active logic for the INP signal
alm_logic: Setting of active logic for ALARM signals
alm_mode: Reacting modes when receiving an ALARM signal.
2
04
1…
Value Meaning
0ON
1OFF
Value Meaning
0 Negative logic
1 Positive logic
Value Meaning
0 Negative logic
1 Positive logic
Value Meaning
0 Negative logic
1 Positive logic
Value Meaning