Adtech TV5600-B01 Series User Manual

User Manual of TV5600-B01 Series Dispensing Control System
39
->Press the [ ]
key -> teach the 5th programming point ->
->Press the motor manual key to move the needle to >Press the [ ]
key -> teach the 6th programming point ->
Press the [ ] button ->Save the program file to complete the dispensing path teaching
6.03.03 Modify programming point
After teaching a dispensing path, sometimes it needs to set the parameters of the programming
point (machining command), such as manually input coordinates, whether to close the glue in
advance, whether to delay glue opening, single point opening time, the end point and the lifting
height after single point closing.
Please refer to the List of Processing Instructions for the detailed meaning of each parameter of
the type programming point (machining command).
1) Modify the programming point coordinates

Adtech TV5600-B01 Series Specifications

General

Brand	Adtech
Model	TV5600-B01 Series
Category	Control Systems
Language	English