Adtech TV5600-B01 Series User Manual

User Manual of TV5600-B01 Series Dispensing Control System
64
Parameter
Description
Motor speed
1) Starting speed: The starting speed of stepping motor should be less than 3
rev /sec, and the starting speed of servo motor should be less than 5 rev /sec
2) Manual low speed: Used for precise positioning during manual teaching
3) Manual high speed: Used for quick positioning during manual teaching
4) Positioning speed: The speed during motionpositioning
5) Acceleration: The larger the value, the faster the change from the starting
speed to the idle speed is. If it is set to 0, it is uniform
6) Reset low speed: Reset speed when approaching the machine origin
7) Reset high speed: Reset speed when moving away from the machine origin
8) Reset acceleration: The speed changes faster during reset. If set to 0, it is
uniform
8.03 Standby parameters
The standby parameter sets the standby position and its automatic dispensing parameters.
8.03.01 Standby position setting
1. ->In handheld box system parameter interface -> Press [ Standby parameters] ->
enter parameter ->

Adtech TV5600-B01 Series Specifications

General

Brand	Adtech
Model	TV5600-B01 Series
Category	Control Systems
Language	English