AEMC 5050 - SET-UP Function

18 Megohmmeter Models 5050/5060
First Function 
• Pressbuttonbrieytoincreasethedisplayednumberslowly.
• Pressbuttonforalongertimetoincreaseatafasterrate.
Second Function 
• Pressbuttonbrieytodecreasethedisplayednumberslowly.
• Pressbuttonforalongertimetodecreaseatafasterrate.
Unlikeallthesecondfunctionsofotherbuttons,itisnotnecessarytopressthe
buttoneachtimetogettothefunction.The symbolremainsdisplayed
andisvalidforthefunction(only),aslongastheuserdoesnotdeactivateitby
pressing oranotherbutton.
2.5.7 SET-UP Function
Congurestheinstrument.
AfterselectingSET-UPwiththerotaryselectorswitch:
• Allthedisplaysegmentsarelitupfor1second.
• Thesoftwareversionnumberisthendisplayed.
• TheinstrumentIDnumberisdisplayednext.
• “PUSH” appears on the small display and “btn” on the main display,
promptingtheoperatortopressabutton.
The SET-UP function is used to directly access the parameters to be pro-
grammed, by pressing the corresponding button.
• After having pressed a button, the corresponding gures or symbols
appearonthescreen.
• Theguresorthesymbolsthatcanbemodied,ashonthescreen.
• Usethe and buttons.
• Alltheparametersareimmediatelyandpermanentlysaved.
w ww . . co m
information@itm.com1.800.561.8187