AEMC 5050 - 7 Dataview Software; Installing Dataview

42 Megohmmeter Models 5050/5060
CHAPTER 7
DATAVIEW
®
SOFTWARE
7.1 Installing DataView
®
DO NOT CONNECT THE INSTRUMENT TO THE PC BEFORE INSTALLING THE
SOFTWARE AND DRIVERS.
NOTE: When installing, the user must have Administrative access rights
during the installation. The users access rights can be changed after the
installationiscomplete.
DataView
®
mustbereinstalledforeachuserinamulti-usersystem.
USB Flash Drive Install
1. InserttheUSBstickintoanavailableUSBport(waitfordrivertobeinstalled).
2. IfAutorunisenabledthenanAutoPlaywindowshouldappearasshown.
w ww . . co m
information@itm.com1.800.561.8187