AEQ Audio Over IP
Routing System
116
NOTE 2: The previous tables show the names of the input/out lines and reception/transmission
channels that are configured by default and that can be edited by means of "CAPITOL IP Setup"
and "Dante Controller" applications, just like the device names, depending on each installation
characteristics.
For example, in a configuration where PROGRAM and AUDITION internal buses are routed to
the first 2 outputs of AoIP board, these transmission channels could be renamed in "Dante
Controller" as follows in order to easily identify them:
CAPITOL IP
buses
Outputs
Labels in CAPITOL IP
Transmission channels
Labels in DANTE Controller
PROGRAM aoip01 CAPITOL_PROGRAM _L
CAPITOL_PROGRAM _R
AUDITION aoip02 CAPITOL_AUDITION _L
CAPITOL_AUDITION _R
To Next Page
Loading...
Need help?
General
