EasyManuals Logo

AEQ BC2000D Series User Manual

Default Icon
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
AEQ Audio Over IP
Routing System
83
You can apply a role to multiple devices. You cannot apply multiple roles to one device.
To see which devices a role has been assigned to, click the role. The assigned device/s
will be highlighted in the 'Target Devices' column.
Automatic Assignments: "Dante Controller" will automatically assign roles to devices,
based on the following rules:
- If there is a perfect device match (i.e. the physical device in the original network
from which the role was created is also found in the target network), the role is
assigned automatically.
- If there is a device name match, the role is assigned automatically.
- If a perfect match or a device name match cannot be made, the role will be
assigned automatically to a device of the same manufacturer and model,
assuming there is an unassigned device of that type.
Removing Assignments: In order to delete a role, just select that role in Target Devices
and click on Clear (or press the keyboard’s Del key), or select another role for it from the
Preset Roles column and then click on Apply Role.
Manual Assignments: To manually apply a role to a device:
- Drag the role onto the device, or
- Select the role and the target device/s in the 'Target Devices' column, and click
Apply Role.
The LED icons against each role indicate the assignment status of the role:
A grey icon indicates that the role has not been assigned to any target devices.
A green icon indicates that the role has been successfully assigned to one or more
target devices.
An amber icon indicates that the role has been assigned to one or more target
devices, but there is a warning condition associated with one or more of the
assignments.
A red icon indicates that the role has been assigned to one or more target devices,
but there is an error condition associated with one or more of the assignments.
A black icon indicates that the role has been assigned to a target device, but the
assignment will have a potentially terminal effect on the operation of the network.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AEQ BC2000D Series and is the answer not in the manual?

AEQ BC2000D Series Specifications

General IconGeneral
BrandAEQ
ModelBC2000D Series
CategoryNetwork Hardware
LanguageEnglish

Related product manuals