Need help?Do you have a question about the AERMEC VMF-485LINK and is the answer not in the manual?
Details the VMF-485LINK expansion's purpose and the units it makes compatible with the VMF communication protocol.
Explains the VMF-485LINK's role in communication and operation with supervisors and heat pumps/fan coils.
Provides a detailed layout of the VMF-485LINK serial interface, including I/O functions and physical ports.
Explains the settings for the SW1 dip-switches and their corresponding unit configurations for FCWI, HMI, and BHP.
Details the initial electrical connections required for the FCWI unit to the VMF-485LINK accessory.
Outlines the procedure for recognizing the FCWI unit with the VMF-485LINK accessory, including LED indications.
Explains how to connect the VMF-485LINK to a supervisor system like VMF-E5/E6 after FCWI recognition.
Presents a diagrammatic overview of how the FCWI units are connected to the VMF-485LINK and supervisor.
Details the initial electrical connections for HMI/BHP units, including the required IC-2P accessory.
Provides step-by-step instructions with screenshots for setting the serial address for HMI/BHP units.
Outlines the procedure for recognizing HMI/BHP units with the VMF-485LINK, including LED indications.
Presents a diagrammatic overview of how HMI/BHP units are connected to the VMF-485LINK and supervisor.
General| Brand | AERMEC |
|---|---|
| Model | VMF-485LINK |
| Category | Computer Hardware |
| Language | English |
To Next Page