AERMEC WRC40 - Front Panel Auto-Opening for Cleaning; Wi-Fi Function Setup and Reset

17
With this function, the front panel of the unit can
be automatically opened to make it easier to clean
the filter.
With the unit switched on, enter the sub-menu
of the function and press the
MENU/OK
FAN
ON/OFF
MODE
SWING
or
MENU/OK
FAN
ON/OFF
MODE
SWING
button to
control the up and down movement of the panel.
Press the
MENU/OK
FAN
ON/OFF
MODE
SWING
button to bring the panel back to
its proper operating position. During this process,
the message RESET WINDOW will appear on the
control panel; the HOME page will be automatically
restored when the operation has ended.
CONTROLLING THE OPENING OF THE
FRONT PANEL OF THE UNIT
After entering the WI-FI function menu, press the
MENU/OK
FAN
ON/OFF
MODE
SWING
or
MENU/OK
FAN
ON/OFF
MODE
SWING
button to activate or deactivate the WI-FI
device installed in the indoor unit.
To reset the WI-FI module, press the
MENU/OK
FAN
ON/OFF
MODE
SWING
or
MENU/OK
FAN
ON/OFF
MODE
SWING
button
and select RESET, then press
MENU/OK
FAN
ON/OFF
MODE
SWING
to confirm.
WIFI FUNCTION