22
Fortnightly timer programming
TWO WEEK TIMER FORTNIGHTLY TIMED
PROGRAMMING
With fortnightly timed programming, up to 8
actions can be programmed (timed switch-on
or switch-off operations) over a 24-hour period,
thereby creating daily time bands for each day of
the two weeks.
To set fortnightly timed programming, enter the
TWO WEEK menu and use the
MENU/OK
FAN
ON/OFF
MODE
SWING
or
MENU/OK
FAN
ON/OFF
MODE
SWING
button to
select:
CURRENT WEEK: to select which of the two
programs to set - FIRST WEEK (WEEK1) or SECOND
WEEK (WEEK2).
TWO WEEK SCHEDULE: this menu gives access to
the timed programming of the week selected.
The programming procedure is the same as for the
WEEKLY TIMER.
Press
MENU/OK
FAN
ON/OFF
MODE
SWING
to select the required day and move on
to the first setting (SHC 1).
Use the
MENU/OK
FAN
ON/OFF
MODE
SWING
or
MENU/OK
FAN
ON/OFF
MODE
SWING
button to select the value you want
to change (when the last value on the right has
been reached, the cursor will automatically move
onto the next line). The values to be set for this
function are:
SCH: indicates the number and status (ON - active,
OFF - not active) of the selected action.
TIME: indicates the time when the selected action
must be implemented.
OnOFF: indicates the command (ON activates the
unit, OFF deactivates it) associated with the selected
action.
COOL: indicates the cooling setting to be assigned
if necessary during the implementation of the
selected action (if the command of the action itself
requires unit switch-on).
HEAT: indicates the heating setting to be assigned
if necessary during the implementation of the
selected action (if the command of the action itself
requires unit switch-on).
Use the
MENU/OK
FAN
ON/OFF
MODE
SWING
or
MENU/OK
FAN
ON/OFF
MODE
SWING
button to define the required set-
ting for the selected value (the value being defined
is shown in black).
Press
MENU/OK
FAN
ON/OFF
MODE
SWING
to save the settings of the current day
and bring the cursor onto the next day to be set.
To quit the sub-menu and return to the previous
levels, press
MENU/OK
FAN
ON/OFF
MODE
SWING
.
To Next Page
Loading...
