16
The QUIET function (available in cooling, heating
and automatic mode) activates or deactivates quiet
operation to reduce the noise level of the indoor
unit and deactivate acoustic feedback.
By activating the INDEPENDENT SWING function,
the four air delivery outlets of the unit can be inde-
pendently controlled.
When the unit is switched on and the function has
been selected, enter the relative sub-menu and
choose one of the following options:
Set independent swing
Reset independent swing
List of independent swing options
Set independent swing
From the swing settings menu, use the
MENU/OK
FAN
ON/OFF
MODE
SWING
or
MENU/OK
FAN
ON/OFF
MODE
SWING
button to select the AIR PORT you want to control
(the number 0 corresponds to the number of rings
at the air outlet on the panel, so you can see which
outlet is being controlled), then press
MENU/OK
FAN
ON/OFF
MODE
SWING
or
MENU/OK
FAN
ON/OFF
MODE
SWING
to
activate or deactivate independent swing for the air
outlet selected.
Press
MENU/OK
FAN
ON/OFF
MODE
SWING
to define which mode the swing of the
motorised delivery fins should work in. The swing
follows this sequence:
The LOW DRY TEMPERATURE defines the set-point
used in dehumidification mode as 12 °C.
The function will be automatically deactivated if the
operating set-point is manually modified while the
unit is working in dehumidification mode.
The SETBACK function allows the unit to carry on
working even after switch-off, to ensure that the
predefined working set-point is reached.
After entering the sub-menu of the SETBACK
function, use the
MENU/OK
FAN
ON/OFF
MODE
SWING
or
MENU/OK
FAN
ON/OFF
MODE
SWING
button to select the
required temperature limit. Now set the limit using
the
MENU/OK
FAN
ON/OFF
MODE
SWING
or
MENU/OK
FAN
ON/OFF
MODE
SWING
button.
The control panel can display the temperature
values in °C or °F. To change the measurement unit,
activate or deactivate the FAHRENHEIT function.
With this function enabled, the motorised air
delivery fin can shift from standard swing to fixed
angle swing, to meet any requirement and ensure
optimum comfort in the room.
QUIET FUNCTION
INDEPENDENT SWING OF THE MOTORISED
DELIVERY FINS
LOW DRY TEMPERATURE FUNCTION
SETBACK FUNCTION
FAHRENHEIT FUNCTION SETTING THE UNIT OF
MEASUREMENT
FIXED ANGLE SWING
NOTE:
If this function is not available for the unit
being used, it will be cancelled automatically
after setting.
SWING
disabled
Reset independent swing
From the swing reset menu, use the
MENU/OK
FAN
ON/OFF
MODE
SWING
or
MENU/OK
FAN
ON/OFF
MODE
SWING
button to
select RESET. To confirm, press
MENU/OK
FAN
ON/OFF
MODE
SWING
.
List of independent swing options
From this sub-menu, you can see the independent
swing activation or deactivation status for each air
outlet on the unit.
NB:
• Only vertical swing (UP&DOWN SWING) is
compatible with this function.
• For the independent swing function to
work, only one of the four air outlets on
the unit can be closed.
• If the independent swing function is
deactivated, the previously defined swing
setting will be restored.
NB:
Function only available for LGC_CS versions.
To Next Page
Loading...
