21
Weekly timer programming
WEEKLY TIMER WEEKLY TIMER
PROGRAMMING
Weekly timer programming allows up to 8 actions
to be programmed (switch-on or switch-o
operations) over a 24-hour period, thereby creating
daily time bands for each day of the week.
To set weekly timed programming, enter the
WEEKLY menu and use the
MENU/OK
FAN
ON/OFF
MODE
SWING
or
MENU/OK
FAN
ON/OFF
MODE
SWING
button to select
he required day of the week. The values that can be
selected are:
SUN: Sunday
MON: Monday
TUE: Tuesday
WED: Wednesday
THU: Thursday
FRI: Friday
SAT: Saturday
Press
MENU/OK
FAN
ON/OFF
MODE
SWING
to select the required day and move on
to the first setting (SHC 1).
Use the
MENU/OK
FAN
ON/OFF
MODE
SWING
or
MENU/OK
FAN
ON/OFF
MODE
SWING
, key to select the value you want to
alter (once it has reached the last value on the right,
the cursor will move on to the next row). The values
to be set for this function are :
SCH: indicates the number and the status (ON ac-
tive, OFF not active) of the selected action.
TIME: indicates the time when the selected action
must be implemented.
OnOFF: indicates the command (ON switch-on unit,
OFF switch-off unit) associated with the selected
action.
COOL: indicates the cooling setting to be assigned
if necessary during the implementation of the
selected action (if the command of the action itself
requires unit switch-on).
HEAT: indicates the heating setting to be assigned
if necessary during the implementation of the
selected action (if the command of the action itself
requires unit switch-on).
Use the
MENU/OK
FAN
ON/OFF
MODE
SWING
or
MENU/OK
FAN
ON/OFF
MODE
SWING
key to indicate the required
setting for that value (the selected value is shown
in black.
Press
MENU/OK
FAN
ON/OFF
MODE
SWING
to save the settings of the current day
and bring the cursor onto the next day to be set.
To quit the sub-menu and return to the previous
levels, press
MENU/OK
FAN
ON/OFF
MODE
SWING
.
To Next Page
Loading...
