SimplEbale
How to use this manual
General
You must read this manual before you operate or do work on the machine.
If more assistance is necessary you should speak to your AGCO dealer.
This manual is only applicable to the models specified on the front cover.
Contents
For quick reference, there is an index at the back of the manual. The index lists the contents and the location
in the manual. Each chapter starts with a table of contents which includes the different sections in that
chapter.
Fastener torques
Always replace fasteners with fasteners of the same specification. Tighten all fasteners to the correct torque
values.
You can find the list of torque values in the service manual or the assembly instructions of the machine. If the
torque value is different, it is specified in the procedure.
Special tools
If it is necessary to use a special tool in a procedure, the tool identification is specified in the procedure.
Illustrations
The illustrations do not always show the same machine specification or machine configuration. The
procedure is the same unless the instruction tells you differently.
The illustrations in this manual use a color system to help you follow the instruction correctly.
Color Description Functions
Target/focus item
The primary component in the step is this color.
Primary component, decal location,
component location
Connectors, fasteners
All components that attach the primary component
to a different component are this color.
Fasteners, electrical connectors
Primary alternative
If there are 2 primary components in the illustration,
1 of the 2 components is this color.
Secondary component
To Next Page
Loading...
Need help?
General
