DD+DIS155
.11E
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
CR 12-X Status in the NX configuration menu:
Devices Digitizer Configuration Digitizer
# Parameter Value
1 Name: DIG_DEFAULT
2 Enable Fast ID Enabled
3 Enable Auto Cropping Disabled
4 Genrad Scan Resolution 100 µm
5 FLFS Scan Resolution 200 µm
4 Device settings: IP Address 192.192.192.192
5 Device Settings: AE Title: DIG_DEFAULT
6 Device settings: Default Router 192.168.0.1
7 Device settings: Subnet Mask 255.255.255.0
Figure 4
Edition 1, Revision 4 CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 1 / Page 8 of 47
03-2013 Type 5151 / 100 / 110 / 200 / 210 Agfa Company Confidential
To Next Page
