DD+DIS155.11E
About this Manual
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1 CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 0 / Page 7 of 7
03-2013 Type 5151 / 100 / 110 / 200 / 210 Agfa Company Confidential
1.3 None Scope
This Service Manual does not describe which combinations of versions of
system components can be made in order to have a working and released
system. For this purpose refer to following documents on the Agfa HealthCare
Library:
o CR/DR Interoperability Matrix, Document ID 31333326
(Intranet Link
/ Extranet Link)
o Solution Structure Data, Document ID 30781759
(Intranet Link
/ Extranet Link)
This Service Manual does not cover the NX Workstation, Type 4406/303.
Refer to the Service Manuals available on the Agfa HealthCare Library path:
Computed Radiography => CR Workstation Software
For software versions of the NX Workstation type 4406/303 which can be used
together with the digitizer, refer to the above mentioned CR/DR Interoperability
Matrix.
Status 03/2013:
The released NX workstation software version is:
For CR 10-X, CR Reader: ≥ NX 2.0.8700/3.0.8700.
For CR 12-X, CR Advanced Reader: ≥ NX 2.0.8800/3.0.8800
To Next Page
