Basic Workflow
Topics:
• Starting the NX workstation and the DR Detector
• Retrieving the patient info
• Moving the unit
• Starting the device
• Positioning
• Selecting the exposure
• Preparing the exposure
• Checking the exposure settings
• Executing the exposure
• Performing a quality control
• Stopping the device
• Using the NX workstation with the X-ray system switched off
• Stopping the NX workstation and the DR Detector
• Using the ‘virtual keyboard’
62 | DR 100e (Digital Radiography) | Basic Workflow
0365B EN 20181015 0853
To Next Page
