Stopping the device
CAUTION:
Risk of damaging the device. Always grip the plug to disconnect
the power cable. Don't disconnect the plug by pulling the cable.
Handle connectors with care.
1. Bring the device to transport position.
2. Press the power off button.
Figure 26: Power off
3. Unplug the power supply cable.
4. Wind the mains cable on the cable reel.
5. Move the device to the location where a next exposure is planned or to a
suitable place for parking.
80 | DR 100e (Digital Radiography) | Basic Workflow
0365B EN 20181015 0853
To Next Page
Loading...
