Retrieving the patient info
Note: If you use a wired network the network cable must be plugged
in to be able to perform this step.
1. On the RIS, schedule the examinations.
2. In NX, query the RIS.
3. Define the patient info for the examination.
4. Start the examination.
Note: If the patient cannot be retrieved from the RIS you should
enter patient data manually. In that case, you can use the ‘virtual
keyboard’.
Related Links
Connecting DR 100e to a wired network on page 97
64 | DR 100e (Digital Radiography) | Basic Workflow
0365B EN 20181015 0853
To Next Page
Loading...
