AGFA DR 100e - Stopping the NX Workstation and the DR Detector

Stopping the NX workstation and the DR Detector
1. On the NX workstation, go to the Main Menu.
2. Click the Show Desktop action button.
The Windows desktop is shown.
3. Go to the Windows Start menu and select Shut down.
The NX application is stopped.
The all-in-one PC is switched off.
4. Switch off the DR Detector.
For detailed information about switching off the DR Detector, refer to the
DR Detector user manual.
5. Charge the battery of the DR Detector.
For detailed information about charging the battery of the DR Detector,
refer to the DR Detector user manual.
Related Links
NX Workstation (all-in-one PC) on page 20
82 | DR 100e (Digital Radiography) | Basic Workflow
0365B EN 20181015 0853