Modifying the exposure parameters of an anatomic
program
The anatomic program consists of six groups of six sets of exposure
parameters, so 36 in total. The default X-ray exposure parameters for each
exposure type can be customized.
1. Press the button to open the list of anatomic programs.
Figure 43: Anatomic programs
An anatomic group is displayed on the first line of the display, with the
anatomic programs listed below.
2. Select the anatomic program for which new exposure parameters are
required.
Figure 44: Select anatomic group
Figure 45: Scroll pages
Figure 46: Select anatomic program
3. Adjust the exposure parameters.
Figure 47: kV and mAs
92
| DR 100e (Digital Radiography) | Advanced Operation
0365B EN 20181015 0853
To Next Page
Loading...
