30 Agilent 1200 Preparative Pump User Manual
3 Installing the Pump
Unpacking the Preparative Pump
Unpacking the Preparative Pump
Damaged Packaging
Upon receipt of your quaternary pump, inspect the shipping containers for
any signs of damage. If the containers or cushioning material are damaged,
save them until the contents have been checked for completeness and the
quaternary pump has been mechanically and electrically checked. If the
shipping container or cushioning material is damaged, notify the carrier and
save the shipping material for the carrier’s inspection.
Delivery Checklist
Ensure all parts and materials have been delivered with the preparative pump.
The delivery checklist is shown in Table 6 on page 31 till Table 9 on page 33.
To aid in parts identification, please see “Parts and Materials for
Maintenance” on page 133. There are two different kits that can possibly be
delivered with the pump:
1 A Basis kit (G1361-68708) is delivered with every isocratic configuration or
if the pump is the first pump in a system (isocratic configuration, order
No. G1361A).
2 A Gradient kit (G1361-68707) is delivered with every additional pump that
is added to a system’s first pump (gradient configuration, order
No. G1391A).
Please report missing or damaged parts to your local Agilent Technologies
sales and service office.
To Next Page
Loading...
Need help?
General
