22 Purification Solution - Developer's Guide
2
Preparing Default Purification Methods
Preparative Method Settings
MSD
Access by Method > Edit entire method or by right click on MSD icon
Save the method changes:
• Method > Save Method.
Intended Pump Flow Set Main Flow and Makeup Flow.
Split Mode Select the target split mode.
Fraction Collection FC Mode
Use sample target masses
MS Signals
Mark active signals (Signal 1, and Signal 2 if used)
Positive adducts
Mark M+H(1) if positive polarity is active
Negative adducts
Mark M-H(1) if negative polarity is active
To Next Page
Loading...
