Agilent 2200 TapeStation System - User Manual 25
Installing the System
3
Unpacking the System
1 Remove the 2200 TapeStation instrument from the packaging and place
on a clean, dry, flat surface.
2 Allow the 2200 TapeStation instrument to acclimatize to the ambient
temperature of the operating environment.
3 Remove the label covering the ScreenTape device holder, as shown in
the image below.
Figure 4 Remove before use
Delivery Checklist
Ensure all parts and materials have been delivered with your system. The
delivery checklist is shown below.
Please report any missing or damaged parts to your local Agilent
Technologies sales and service office.
Please note that ScreenTape devices and reagent kits are not provided with instrument
delivery and must be purchased separately.
To Next Page
Loading...
Need help?
General
