Agilent 2200 TapeStation System - User Manual 37
Using the 2200 TapeStation System
4
Additional Components Required by the User
Additional Components Required by the User
Additional Consumables Required for the 2200 TapeStation
Instrument
• Loading tips (5067- 5152 or 5067- 5153)
• Optical Tube 8x Strip (401428) and Optical Cap 8x Strip (401425) or
96- well Sample Plates (5067- 5150) and 96- well Plate Foil Seal
(5067- 5154).
• Vor tex mixer (See note below)
Additional Material Required (Not Supplied)
• Volumetric pipette
• Centrifuge
• Heating block or PCR machine
Mixing recommendations
• 2200 TapeStation instruments are supplied with an optional IKA MS3 vortexer which
includes a 96-well plate adaptor suitable for both 96-well PCR plates and 8-way strips.
• This vortexer is recommended for use with all ScreenTape assays with the exception of
the P200 ScreenTape assay which should be manually vortexed.
• It is recommended that all current 2200 TapeStation system users purchase this
instrument direct from IKA for use with these assays. Please quote part number
4674100 when ordering.
• Agilent Technologies will not sell these parts separately.
• If an IKA MS3 vortexer is not available, please ensure thorough manual vortex mixing —
10 seconds on maximum speed.
To Next Page
Loading...
Need help?
General
