24 Agilent 2200 TapeStation System - User Manual
3 Installing the System
Unpacking the System
Unpacking the System
Unpacking the Agilent 2200 TapeStation Instrument
Prerequisites The installation and familiarization service is bundled with instrument sale, and will be
conducted by an Agilent engineer.
Instrument and software familiarization should be completed before use.
Do not attempt to use the 2200 TapeStation instrument until you have read the
accompanying Site and Safety Manual.
Condensation within the instrument
Condensation will damage the system electronics.
➔ If your instrument was shipped in cold weather, leave it in its box and allow it to
warm slowly to room temperature to avoid condensation.
"Defective on arrival" problems
If there are signs of damage, please do not attempt to install the instrument. Inspection
by Agilent is required to evaluate if the instrument is in good working condition.
➔ Notify your local Agilent Representative and the Technical support channel.
➔ An Agilent service representative will inspect the instrument at your site and
initiate appropriate actions.
Personal injury
The TapeStation instrument is heavy.
➔ Enlist the aid of a co-worker to share the lifting load to avoid personal injury.
To Next Page
Loading...
Need help?
General
