32 Agilent 2200 TapeStation System - User Manual
3 Installing the System
Installing the System
4 Windows may display a Found New Hardware wizard once the software
has loaded. In this instance, always perform the following steps:
a Select No, not this time to prevent connecting to Windows Update and
searching for software.
b In the next window select Install the Software automatically.
c If a window appears, indicating the software did not pass the
windows logo testing, click Continue Anyway.
A window appears, indicating that the hardware has been successfully
installed. The 2200 TapeStation system will function.
As there is more than one driver that can be detected and installed, you may need to follow
these steps more than once.
You may need to follow these steps if you change the USB port on the laptop for the
2200 TapeStation instrument connector cable.
To Next Page
Loading...
