Agilent Technologies 54830 Series Service Guide

Chapter 1: General Information
Accessories available
1–7
Accessories available
The following accessories are available for use with the Agilent Technologies Infiniium
oscilloscope.
Table 1-3 Accessories for the Agilent Technologies Infiniium Oscilloscope Model 54830 Series
Agilent 1144A 800 MHz Active Probe
Requires Agilent 1142A power supply—Agilent 01144-61604 probe power extender also
required when using 2 or more Agilent 1144A active probes
Agilent 1145A 2-channel 750 MHz SMT active probe
Requires Agilent 1142A power supply
Agilent 1146A Oscilloscope AC/DC Current Probe
Agilent 1152A 2.5 GHz, 10:1, 100 kΩ, 0.6 pF Active Probe
Agilent 1153A 200 MHz Differential Probe
Agilent 1155A 750 MHz 2-Channel, Low-Mass Active Probe
Agilent 1165A Standard probe
Agilent 1162A 1:1 Passive Probe
Agilent 1163A 10:1 500-Ω, low-C Passive Probe
Agilent 1171A 500 MHz Low-Mass, miniature 10:1 10 M
Ω Passive Probe
Agilent 1173A 500 MHz Low-Mass, miniature 20:1 10 MΩ Passive Probe
Agilent 10240B BNC Blocking Capacitor
Agilent 10833A GPIB cable, 1 m
Agilent 10833B GPIB cable, 2 m
Agilent 10833C GPIB cable, 4 m
Agilent 10833D GPIB cable, 0.5 m
Agilent 11094B 75Ω Feedthrough Termination
Agilent 34810B Benchlink Oscilloscope Software
Agilent 34398A +
Agilent 34399A
RS-232-C printer cable + adapter kit
Agilent 54006A 6 GHz, 10:1 (500 Ω) or 20:1 (1 kΩ), .25 pF
Agilent 01144-61604 1:2 probe power fan-out (for use with Agilent 1144A and Agilent 1145A)
Agilent C2950A Parallel printer cable, 2 m
Agilent E2609B Rackmount Kit
Agilent E2647A Cordless Trackball
Agilent E2636A Microphone Replacement

Agilent Technologies 54830 Series Specifications

General

Brand	Agilent Technologies
Model	54830 Series
Category	Test Equipment
Language	English