Agilent Technologies 54830 Series Service Guide

Chapter 2: Preparing for Use
To connect power
2–6
Figure 2-3
In
finiium Oscilloscope Power Cord Connection
The oscilloscope power supply automatically adjusts for line input voltages in the range 100 to
240 VAC. Therefore, you do not need to adjust an input line voltage setting. The line cord
provided is matched by Agilent Technologies to the country of origin of the order.
4 Ensure that you have the correct line cord. See table 2-1.

Agilent Technologies 54830 Series Specifications

General

Brand	Agilent Technologies
Model	54830 Series
Category	Test Equipment
Language	English