5 Other Setup Tasks
To confirm the collision cell gas flow rate (6470A and 6495A/B only)
100 Agilent 6400 Series Triple Quad LC/MS System Installation Guide
Figure 51 Ion source settings for 6470A
11 Check that the calibrant level is not low.
12 In the Data Acquisition program, right-click the QQQ icon, then click
Calibrant.
The initial calibrant test takes 40 minutes to complete. The calibrant
includes m/z 322 and its product ion m/z 290.
Figure 52 QQQ context menu
To Next Page
Loading...
