AM Subsystem
Parameter Typical Return
{SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|PRBS|ARB}, default
SINusoid, default SINusoid.
View internal function waveforms.
SIN, SQU, RAMP, NRAM, TRI, NOIS,
PRBS, or ARB
Select a sine wave as the modulating waveform.
AM:INT:FUNC SIN
l This command should be used only with the internal modulation source (AM:SOURce INTernal).
l Pulse and DC cannot be carrier waveform for AM.
Agilent 33500 Series Operating and Service Guide 159
To Next Page
Loading...
