SYSTem Subsystem
SYSTem Subsystem
The SYSTem subsystem manages instrument state storage, power-down recall, error conditions, self test, front-panel
display control and remote interface configuration.
The instrument uses LAN port 5024 for SCPI Telnet sessions, and port 5025 for SCPI
Socket sessions.
l SYSTem:BEEPer[:IMMediate] - issues a single beep
l SYSTem:BEEPer:STATe - disables or enables beeper
l SYSTem:COMMunicate:ENABle - disables or enables GPIB, USB, LAN interface, and remote services
l SYSTem:COMMunicate:GPIB:ADDRess - assigns instrument's GPIB (IEEE-488) address
l SYSTem:DATE - sets system clock date
l SYSTem:ERRor? - reads and clears one error from error queue
l SYSTem:LICense:CATalog? - lists installed, licensed options
l SYSTem:LICense:DELete - deletes a license
l SYSTem:LICense:DELete:ALL - deletes all licenses
l SYSTem:LICense:DESCription? - returns description of a licensed option
l SYSTem:LICense:ERRor? - lists errors generated during license installation
l SYSTem:LICense:ERRor:COUNt? - returns number of errors generated during license installation
l SYSTem:LICense:INSTall - installs licenses from a file or folder
l SYSTem:LOCK:NAME? - returns current I/O interface
l SYSTem:LOCK:OWNer? - returns interface that has the lock
l SYSTem:LOCK:RELease - releases lock and decrements lock count by 1
l SYSTem:LOCK:REQuest? - requests lock of current interface
l SYSTem:SECurity:IMMediate - sanitizes user-accessible instrument memory
l SYSTem:TIME - sets system clock time
l SYSTem:VERSion? - returns version of SCPIused by instrument
SYSTem:BEEPer[:IMMediate]
Issues a single beep.
Parameter Typical Return
(none) (none)
Issue a single beep:
SYST:BEEP
Agilent 33500 Series Operating and Service Guide 299
To Next Page
Loading...
