SYSTem Subsystem
SYSTem:LICense:ERRor:COUNt?
Returns the number of license errors generated by SYSTem:LICense:INSTall.
Parameter Typical Return
(none) +0
Return number of license errors:
SYST:LIC:ERR:COUN?
SYSTem:LICense:INSTall [{<folder> | <file>}]
SYSTem:LICense:INSTall? <option>
This command installs all licenses from a specified file or from all license files in the specified folder. They query returns
0 or 1 to indicate whether the specified license is installed.
Parameter Typical Return
<folder> may be any
valid folder name. Default
is root directory of a front
panel USBstorage device.
<file> may be any valid
license file name
<option is one of the
licensed options
0 (license not installed) or 1 (license installed)
Install licenses from a file:
SYST:LIC:INSTALL "USB:\33522B_LICENSE071.lic"
l License files must have a ".lic" file extension.
l The format for <file> is "[<drive>:<path>]<file_name>", where <drive> can be INTernal or USB, and <path>
must be an absolute folder path.
l INTernal specifies the internal flash file system.USB specifies a front panel USB storage device.e.
l If <drive>:<path> is omitted, the folder specified by the MMEMory:CDIRectory command is used.
l Absolute paths begin with "\" or "/" and start at the root folder of <drive>.
l Folder and file names cannot contain the following characters: \ / : * ? " < > |
l The combination of folder and file name cannot exceed 240 characters.
l The specified folder must exist and cannot be marked hidden or system.
SYSTem:LOCK:NAME?
Returns the current I/O interface (the I/O interface in use by the querying computer).
304 Agilent 33500 Series Operating and Service Guide
To Next Page
Loading...
