Features and Functions
Features and Functions
This section contains details on instrument features, including front panel and remote interface operation. You may
want to read Front-Panel Menu Reference first. See SCPI Programming Reference for details on SCPI commands and
queries. This section covers:
Output Configuration
Pulse Waveforms
Amplitude Modulation (AM) and Frequency Modulation (FM)
Phase Modulation (PM)
Frequency-Shift Keying (FSK) Modulation
Pulse Width Modulation (PWM)
Sum Modulation
Frequency Sweep
Burst Mode
Triggering
Dual Channel Operations
System-Related Operations
Remote Interface Configuration
External Timebase Reference
Embedded Waveform Editor
Throughout this document, "default" states and values are identified. These are the power-on default states provided
you have not enabled the power-down recall mode (see Instrument State Storage).
Agilent 33500 Series Operating and Service Guide 55
To Next Page
Loading...
