Introduction to Instrument
For protection from electrical shock, the power cord ground must not be defeated. If only a two-con-
tact electrical outlet is available, connect the instrument’s chassis ground screw (see above) to a
good earth ground.
Contacting Agilent Technologies
You can contact Agilent Technologies for warranty, service, or technical support.
l In the United States: (800) 829-4444
l In Europe: 31 20 547 2111
l In Japan: 0120-421-345
Use www.agilent.com/find/assist for information on contacting Agilent worldwide, or contact your Agilent Technologies
Representative.
16 Agilent 33500 Series Operating and Service Guide
To Next Page
Loading...
Need help?
General
