IO Libraries and Instrument Drivers
The Agilent IO Libraries Suite software, including installation instructions, is on the Agilent Automation Ready CD-
ROM provided with your instrument.
For information about connecting and configuring USB, LAN, and GPIB interfaces, refer to the Agilent USB/LAN/GPIB
Interfaces Connectivity Guide on the Agilent Automation Ready CD-ROM, and at www.agilent.com/find/connectivity.
Web Interface
The instrument includes a built-in Web Interface. You can use this interface over LAN for remote instrument access
and control via a Java™-enabled Web browser, such as Microsoft® Internet Explorer.
To use the Web Interface:
1. Establish a LAN connection from your PC to the instrument.
2. Open your PC's Web browser.
3. Launch the instrument's Web Interface by entering the instrument's IP address or fully-qualified hostname in the
browser address field.
4. Follow the instructions in the Web Interface's on-line help.
Example Programs
There are several example programs on the product page Web site (www.agilent.com/find/33500). These are appli-
cation-focused programs that demonstrate different programming environments. This document also includes pro-
gramming examples to help get you started.
Contacting Agilent Technologies
You can contact Agilent Technologies for warranty, service, or technical support.
l In the United States: (800) 829-4444
l In Europe: 31 20 547 2111
2 Agilent 33500 Series Operating and Service Guide
To Next Page
Loading...
Need help?
General
