Agilent Technologies Agilent 3499A User Manual

120
Chapter 5 Remote Interface Reference
3499A/B/C SCPI Alphabetical Reference
5
Command Summary
SENSe:DIGital
:DATA:BIT? <bit_port>
Read the specified bit_port. See page 146.
:DATA[:<BYTE|WORD|LWORD>][:VALue]? <port>
Read data from the specified port. See page 146.
:DATA[:<BYTE|WORD|LWORD>]:BLOCK? <port>,<size>
Read a block of data from the specified port. See page 146.
:DATA:[<BYTE|WORD|LWORD>:]TRACE <port>,<sys_mem_name>
Read a block of data from the specified port to the predefined memory
block. See page 146.
:TRACe[:DATA]? <sys_mem_name>
Get the data block being read. See page 146.
STATus
:OPERation:CONDition?
Query the Operation Condition register. See page 150.
:OPERation:ENABle <unmask>
Set the Operation Enable register. See page 150.
:OPERation:ENABle?
Query the Operation Enable register. See page 150.
:OPERation[:EVENt]?
Query the Operation Event register. See page 150.
:PRESet
Clear the Standard Operation enable register. See page 150.
SYSMODE <0|1|SCPI|HP3488A>
Specify a system mode for the instrument. See page 159.
SYSMODE?
Query the system mode for the instrument. See page 159.

Agilent Technologies Agilent 3499A Specifications

General

Brand	Agilent Technologies
Model	Agilent 3499A
Category	Control Systems
Language	English