121
Chapter 5 Remote Interface Reference
3499A/B/C SCPI Alphabetical Reference
4
5
Command Summary
SYSTem
:CPON <slot|ALL>
Reset the module to its power-on state. See page 157.
:CTYPe? <slot>
Query the card type and the serial number. See page 153.
:ERRor?
Query the error queue. See page 153.
:LOCal
Set the instrument to local mode. See page 160.
:REMote
Set the instrument to remote mode. See page 160.
:RWLock
Lock all keys on the front panel. See page 160.
:STATe:DELete <1-10>|ALL
Clear one or all the previously stored instrument states. See page 147.
:VERSion?
Query the firmware version of the instrument. See page 153.
TRIGger
[:IMMediate]
Software trigger for HOLD off triggering. See page 138.
:SOURce <BUS|EXTernal|IMMediate|TIMer|MIX|HOLD>
Select trigger source in trigger layer. See page 135.
:SOURce?
Query trigger source in trigger layer. See page 135.
:TIMer <seconds>|MINimum|MAXimum
Set timer for channel-to-channel (scanning). See page 136.
:TIMer? <MINimum|MAXimum>
Query timer in trigger layer. See page 136.
To Next Page
Loading...
Need help?
General