Agilent Technologies Agilent 3499A

123
Chapter 5 Remote Interface Reference
3499A/B/C SCPI Commands Functionally Grouped
4
5
Scan
Configuration
Commands
(see page 134 for more information)
ARM
:SOURce <BUS|EXTernal| IMMediate|TIMer|MIX|HOLD>
:SOURce?
:COUNt <number>|MIN|MAX|INFinity
:COUNt? [MIN|MAX|INFinity]
:TIMer <seconds>|MIN|MAX
:TIMer? [MINimum|MAXimum]
TRIGger
:SOURce <BUS|EXTernal| IMMediate|TIMer|MIX|HOLD>
:SOURce?
:TIMer <seconds>|MIN|MAX
:TIMer? [MIN|MAX]
[ROUTe:]
[CHANnel:]DELay <seconds>,<channel_list>|ALL
[CHANnel:]DELay? <channel_list>
CONFigure
:EXTernal[:TRIGger]:SOURce <slot>
:EXTernal[:TRIGger]:SOURce?
:EXTernal[:TRIGger][:OUTPut] <0|1|OFF|ON>
:EXTernal[:TRIGger][:OUTPut]?
Scanning
Commands
(see page 138 for more information)
INITiate
ABORt
TRIGger
[:IMMediate]
*TRG
Digital Input
Commands
(see page 142 for more information)
SENSe:DIGital:DATA
:BIT? <bit_port>
[:<BYTE|WORD|LWORD>][:VALue]? <port>
[:<BYTE|WORD|LWORD>]:BLOCK? <port>,<size>