124
Chapter 5 Remote Interface Reference
3499A/B/C SCPI Commands Functionally Grouped
5
Digital Output
Commands
(see page 143 for more information)
SOURce:DIGital:DATA
:BIT <bit_port>,<0|1>
[:<BYTE|WORD|LWORD>][:VALue] <port>,<data>
[:<BYTE|WORD|LWORD>]:BLOCK <port>,<block_data>
Digital
Configuration
Commands
(see page 140 for more information)
SOURce:DIGital
:MODE <slot>,<mode>
:MODE? <slot>
:CONTrol:POLarity <slot>,<0|1|POS|NEG>
:CONTrol:POLarity? <slot>
:FLAG:POLarity <slot>,<0|1|POS|NEG>
:FLAG:POLarity? <slot>
:IO:POLarity <slot>,<0|1|POS|NEG>
:IO:POLarity? <slot>
SOURce:DIGital:DATA
[:<BYTE|WORD|LWORD>]:POLarity <port>,<0|1|POS|NEG>
[:<BYTE|WORD|LWORD>]:POLarity? <port>
Digital I/O
Memory
Commands
(see page 145 for more information)
SOURce:DIGital:DATA
[:<BYTE|WORD|LWORD>]:TRACe <port>,<sys_mem_name>
SOURce:DIGital:TRACe
:DEFine <sys_mem_name>,<size>[,<fill>]
:DEFine? <sys_mem_name>
:DEFine:CATalog?
[:DATA] <sys_mem_name>,<block_data>
:DELete[:NAME] <sys_mem_name>
:DELete:ALL
SENSe:DIGital:DATA
[:<BYTE|WORD|LWORD>]:TRACe <port>,<sys_mem_name>
SENSe:DIGital
:TRACE[:DATA]? <sys_mem_name>
To Next Page
Loading...
Need help?
General